Wie kan mij helpen, aub?

[missdreams]

Ik startte mijn laptop net op en ik krijg een zwarte scherm met een blauwe balk: Enter current password Wat moet ik doen? Het gaat duidelijk niet om mijn gebruikerswachtwoord die ik ingesteld heb, want die pakt ie niet. Please help

[missdreams]

Waar zijn de computerhelden? heb op internet gezocht naar oplossingen maar kan niets vinden!

[Joacim]

http://www.uktsupport.co.uk/reference/biosp.htm

[Joacim]

I solved the problem finally! I got the motherboard manual and read it through the whole morning. I found the most important information about the CMOS jumpers setting. 1. There is a BIOS Setup Configuration Jumpers (3 pins) Setting on the motherboard. 2. There are three modes that can be set for the Jumpers Setting: Normal Mode - Jumper set to pin 1-2 Configuration Mode - Jumper set to pin 2-3 Recovery Mode - none For normal mode, the BIOS will use corrent configuration information and PASSWORD for booting. For Configure mode. After the POST runs, setup runs automatically. And the maintenance menu is displayed. 3. Therefore I set the BIOS jumpers to Configure Mode, turn on the computer, access the BIOS maintenance screen, delete the password, saved and exit the BIOS screen. 4. Then I set the BIOS jumper to Normal Mode again. 5. That's it. The computer now boots without asking for password. P.S. I think the BIOS password is set by the computer shop before sold to me. Bron (http://forums.devshed.com/showpost.php?p=1567091&postcount=6)

[missdreams]

Dank je wel, maar Computertaal in het engels is geen goed idee voor mij:jammer: