Problemen met printer

[mijnmama]

Hallo Computer kenners, Wie kan me helpen met mijn printer? Het zit namelijk zo, ik heb alle snoeren erin zitten, net nieuwe cartridges gekocht. Maar hij geeft nog steeds aan dat ik mijn inktpatronen moet controleren... Nu heb ik ze tig keer erin en eruit gehaald, maar niks werkt.. Help!!

[Juara]

welk merk/model heb je?

[mijnmama]

Hp Psc 1315

[Juara]

According to the user guide, the problem you're experiencing could be due to the following: Print cartridge access door might be open. • Close the access door. Print cartridges might be missing or not installed properly. • Re-insert the print cartridges and make sure they are properly seated. There might be a problem with the print cartridge. • Close the access door. If the light continues to blink, one of the print cartridges is defective. Do the following: 1) Remove the black (or photo) print cartridge. 2) Close the access door. If the "check print cartridge" light blinks, the tri-color print cartridge is defective and must be replaced. If the light does not blink, the black (or photo cartridge) is defective. In all probability, the contacts on the contact ribbon are not connecting properly. Take a common pencil eraser and rub lightly across the contacts on the ribbon to remove any contaminants or debris. Check the contacts inside the cartridge carrier to ensure that they're not dirty, bent or broken. You should also inspect the carrier itself. If the plastic frame is cracked or broken and the cartridge can wobble around, it will usually install without any trouble but when you close the access door the carriage immediately moves back into print-ready position. The cartridge will shift and break its' connection. This will cause these types of errors as well. If it's cracked or broken, go and get a new printer.

[cotedor]

Hallo Computer kenners, Wie kan me helpen met mijn printer? Het zit namelijk zo, ik heb alle snoeren erin zitten, net nieuwe cartridges gekocht. Maar hij geeft nog steeds aan dat ik mijn inktpatronen moet controleren... Nu heb ik ze tig keer erin en eruit gehaald, maar niks werkt.. Help!! misschien dat die cartridges nog een sticker of laagje (seal) op de uitgang van de inkt heeft zitten die je eerst moet los maken, zodat de inkt eruit kan. anders stop de cartridge erin en daarna haal je de stroom eraf en het stekkertje naar je pc,laat die een 2 min. even zo staan, daarna weer stekkertje terug en de stroom erop. en kijken wat die dan doet als die weer opstart. goodluck.

[Golden_PowerV3]

nieuwe printer kopen

[mijnmama]

According to the user guide, the problem you're experiencing could be due to the following: Print cartridge access door might be open. • Close the access door. Print cartridges might be missing or not installed properly. • Re-insert the print cartridges and make sure they are properly seated. There might be a problem with the print cartridge. • Close the access door. If the light continues to blink, one of the print cartridges is defective. Do the following: 1) Remove the black (or photo) print cartridge. 2) Close the access door. If the "check print cartridge" light blinks, the tri-color print cartridge is defective and must be replaced. If the light does not blink, the black (or photo cartridge) is defective. In all probability, the contacts on the contact ribbon are not connecting properly. Take a common pencil eraser and rub lightly across the contacts on the ribbon to remove any contaminants or debris. Check the contacts inside the cartridge carrier to ensure that they're not dirty, bent or broken. You should also inspect the carrier itself. If the plastic frame is cracked or broken and the cartridge can wobble around, it will usually install without any trouble but when you close the access door the carriage immediately moves back into print-ready position. The cartridge will shift and break its' connection. This will cause these types of errors as well. If it's cracked or broken, go and get a new printer. Ik moet zeker een nieuwe printer kopen!:S